Command Line Interface
GigabitEthernet 1/6 access-list policy ID is 0 GigabitEthernet 1/7 access-list policy ID is 0 GigabitEthernet 1/8 access-list policy ID is 0
2.1.4
Ethernet Interface Reference In the CE Services product, the Ethernet interface (“port”) is referenced in the following manner: * means all ports of all types on all switches GigabitEthernet: defines the Ethernet type (1 Gigabit Ethernet Port), which requires a follow-up parameter (< port_type_list> in the sample below) that specifies the switch and the port number(s) on the switch (for example: 1/8 indicates port 8 on switch 1 or 3/1,3,5-7 indicates ports 1, 3, 5, 6, and 7 on switch 3) Sample Syntax: clear dot1x statistics [ interface ( <port_type> [ < port_type_list> ] ) ]
2.1.5
CLI Command Description The following sections will describe each command as follows:
List the individual command
¾
¾ Give a brief description of the action triggered by the command
¾ Show the syntax of the command, and list the legal values and meanings of the parameters
2.2
Clear Commands
Use the clear commands to reset functions. The following functions can be reset (cleared): Access Access management. Access-list Access list. Dot1x IEEE Standard for port-based Network Access Control. EPS Ethernet Protection Switching. ERPS Ethernet Ring Protection Switching. IP Interface Internet Protocol config commands Ipv6 IPv6 configuration commands. LACP Clear LACP statistics. Link-OAM Clear Link OAM statistics. LLDP Clears LLDP statistics. Logging Syslog MAC MAC Address Table
Confidential
User Guide: CE Services
Page 23
Made with FlippingBook interactive PDF creator