Web Interface – Configuration
DTE's configured in Passive mode do not initiate the Discovery process. Passive DTE's react to the initiation of the Discovery process by the remote DTE. This eliminates the possibility of passive to passive links. Passive DTE's shall not send Variable Request or Loopback Control OAMPDUs.Role Set or show the LACP activity status: Active: Transmit LACP packets each second Passive Wait for an LACP packet from a partner (speak if spoken to) Lookback Support Controls whether the loopback support is enabled for the switch port. Link OAM remote loopback can be used for fault localization and link performance testing. Enabling the loopback support will allow the DTE to execute the remote loopback command that helps in the fault detection. Link Monitor Support Controls whether the Link Monitor support is enabled for the switch port. On enabling the Link Monitor support, the DTE supports event notification that permits the inclusion of diagnostic information. MIB Retrieval Support Controls whether the MIB Retrieval Support is enabled for the switch port. On enabling the MIB retrieval support, the DTE supports polling of various Link OAM based MIB variables' contents. Loopback Operation If the Loopback support is enabled, enabling this field will start a loopback operation for the port.
4.42.2 Link OAM Port Configuration Buttons Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
Confidential
User Guide: CE Services
Page 246
Made with FlippingBook interactive PDF creator