Web Interface – Configuration
Hello Time The interval between sending STP BPDU's. Valid values are in the range 1 to 10 seconds, default is 2 seconds. Note: Changing this parameter from the default value is not recommended, and may have adverse effects on your network. Forward Delay Set or show the delay used by STP Bridges to transit Root and Designated Ports to Forwarding (used in STP compatible mode). Valid values are in the range 4 to 30 seconds. Max Age Set or show the maximum age of the information transmitted by the Bridge when it is the Root Bridge. Valid values are in the range from 6 to 40 seconds, and MaxAge must be <= (FwdDelay-1)*2. Maximum Hop Count Set or show the initial value of remaining Hops for MSTI information generated at the boundary of an MSTI region. It defines how many bridges a root bridge can distribute its BPDU information to. Valid values are in the range 6 to 40 hops. Transmit Hold Count Set or show the number of BPDU ’ s a bridge port can send per second. When exceeded, transmission of the next BPDU will be delayed. Valid values are in the range 1 to 10 BPDUs per second.
4.45.2 STP Bridge Configuration – Advanced Settings
This section allows the user to configure the Bridge Configuration Advanced settings: Edge Port BPDU Filtering Set or show Edge Port BPDU Filtering status. When Edge Port BPDU Filtering is enabled, a port explicitly configured as Edge will transmit and receive BPDUs.
Edge Port BPDU Filtering is enabled
Edge Port BPDU Filtering is disabled (This is the default.)
Edge Port BPDU Guard Set or show Edge Port BPDU Guard status.
When Edge Port BPDU Guard is enabled, a port explicitly configured as Edge will disable itself upon reception of a BPDU. The port will enter the error-disabled state, and will be removed from the active topology.
Edge Port BPDU Guard is enabled
Edge Port BPDU Guard is disabled (This is the default.)
Confidential
User Guide: CE Services
Page 252
Made with FlippingBook interactive PDF creator