Web Interface – Configuration
IGMP Snooping Enabled Set or show the per VLAN IGMP Snooping status.
Enable the Global IGMP Snooping
Disable the Global IGMP Snooping (This is the default.) Up to 32 VLANs can be selected for IGMP Snooping.
Querier Election
Enable this entry to join IGMP Querier election in the VLAN (This is the default.) Disable this entry to act as an IGMP Non-Querier Querier election is used to dedicate the Querier. This is the only Querier to which the sends Query messages, on a particular link. Querier election rule determines that IGMP Querier or MLD Querier with the lowest IPv4/IPv6 address wins the election. Querier Address Set or show the IPv4 address as source address used in IP header for IGMP IGMP Querier election. When the Querier address is not set, the system uses IPv4 management address of the IP interface associated with this VLAN. When the IPv4 management address is not set, system uses the first available IPv4 management address. Otherwise, system uses a pre-defined value. By default, this value will be 192.0.2.1. This column displays the switch port number of the logical STP port. Compatibility Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced IGMPv2, Forced IGMPv3, default compatibility value is IGMP-Auto. PRI Priority of Interface. It indicates the IGMP control frame priority level generated by the system. These values can be used to prioritize different classes of traffic. The allowed range is 0 (best effort) to 7 (highest), default interface priority value is 0.
RV Robustness Variable.
Confidential
User Guide: CE Services
Page 273
Made with FlippingBook interactive PDF creator