Web Interface – Configuration
Residence Port The port where MEP is monitoring - see 'Direction'. For a EVC MEP the port must be a port in the EVC. For a VLAN MEP the port must be a VLAN member. Level The MEG level of this MEP. Flow Instance The MEP is related to this flow - See 'Domain'. This is not relevant and not shown in case of Port MEP. Tagged VID Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this VID. Entering '0' means no TAG added. EVC MEP: This is not used. VLAN MEP: This is not used. EVC MIP: On Serval, this is the Subscriber VID that identify the subscriber flow in this EVC where the MIP is active. This MAC The MAC of this MEP - can be used by other MEP when unicast is selected (Info
only). Alarm There is an active alarm on the MEP.
4.63.2 MEP Buttons
Add New MEP: Click to add a new MEP entry. Refresh: Click to refresh the page immediately. Save: Click to save all changes. Reset:
Click to undo any changes made locally and revert to previously saved values.
Confidential
User Guide: CE Services
Page 303
Made with FlippingBook interactive PDF creator