Web Interface – Configuration
Port 0 APS MEP The Port 0 APS PDU handling MEP. Port 1 APS MEP
The Port 1 APS PDU handling MEP. As only one APS MEP is associated with interconnected sub-ring without virtual channel, it is configured as "0" for such ring instances. "0" in this field indicates that no Port 1 APS MEP is associated with this instance.
Ring Type Type of Protecting ring. It can be either major ring or sub-ring.
Interconnected Node Interconnected Node indicates that the ring instance is interconnected. Click on the checkbox to configure this. "Yes" indicates it is an interconnected node for this instance. "No" indicates that the configured instance is not interconnected. Virtual Channel Sub-rings can either have virtual channel or not on the interconnected node. This is configured using "Virtual Channel" checkbox. "Yes" indicates it is a sub-ring with virtual channel. "No" indicates, sub-ring doesn't have virtual channel. Major Ring ID Major ring group ID for the interconnected sub-ring. It is used to send topology change updates on major ring. If ring is major, this value is same as the protection group ID of this ring.
Alarm There is an active alarm on the ERPS.
4.64.2 ERPS Buttons
Add New Protection Group: Click to add a new Protection group entry. Refresh: Click to refresh the page immediately. Save: Click to save all changes. Reset:
Click to undo any changes made locally and revert to previously saved values.
Confidential
User Guide: CE Services
Page 305
Made with FlippingBook interactive PDF creator