Web Interface – Configuration
¾ Add or remove port members of each Private VLAN
Delete
Check to delete a Private VLAN entry. It will be deleted during the next save.
Do not delete the entry. (This is the default.)
Private VLAN ID Set or show ID of this particular private VLAN. Port Members A row of check boxes for each port is displayed for each private VLAN ID.
Include this port in the Private VLAN (configured in this row)
Remove or exclude this port from the Private VLAN (configured in this row) By default, no ports are members, and all boxes are unchecked.
4.67.2 Private VLAN Membership Configuration Buttons Auto-refresh:
Enable Auto-refresh - refresh the page automatically every 3 seconds Disable Auto-refresh (This is the default.)
Refresh : Click to refresh the page immediately Add a New Private VLAN
Click to add a new Private VLAN ID. An empty row is added to the table, and the private VLAN can be configured as needed. The allowed range for a private VLAN ID is the same as the switch port number range. Any values outside this range are not accepted, and a warning message appears. Click “ OK ” to discard the incorrect entry, or click “ Cancel ” to return to the editing and make a correction. Click the “ Delete ” button to undo the addition of a new Private VLAN. The Private VLAN is enabled when you click “ Save ” .
Save:
Click to save all changes
Reset:
Click to undo any changes made locally and revert to previously saved values
Confidential
User Guide: CE Services
Page 315
Made with FlippingBook interactive PDF creator