Web Interface – Configuration
4.69 VCL – Mac-Based VLAN
The MAC address to VLAN ID mappings can be configured here. This page allows adding and deleting MAC-based VLAN Classification List entries and assigning the entries to different ports.
4.69.1 VCL Mac-Based VLAN Configuration Delete
Check to delete a MAC to VLAN ID mapping entry. It will be deleted during the next save.
Do not delete the entry. (This is the default.)
Mac Address Indicates the MAC address of the mapping. VLAN ID Indicates the VLAN ID the above MAC will be mapped to.
Port Members A row of check boxes for each port is displayed for each MAC to VLAN ID mapping entry. To include a port in the mapping, check the box. To remove or exclude the port from the mapping, make sure the box is unchecked. By default, no ports are members, and all boxes are unchecked.
4.69.2 VCL Mac-Based VLAN Configuration Buttons Auto-refresh:
Enable Auto-refresh - refresh the page automatically every 3 seconds Disable Auto-refresh (This is the default.)
Refresh : Click to refresh the page immediately Add a New Private VLAN
Click to add a new MAC to VLAN ID mapping entry. An empty row is added to the table, and the mapping can be configured as needed. Any unicast MAC address can be used to configure the mapping. No broadcast or multicast MAC addresses are allowed. Legal values for a VLAN ID are 1 through 4095.
Confidential
User Guide: CE Services
Page 317
Made with FlippingBook interactive PDF creator