Web Interface – Configuration
Specific:
Value: valid PID (a.k.a Ether Type) can be 0x0000-
0xFFFF
Any
IPv4 Parameters Set or show the IPv4 Parameters. When one of the following options is selected for an IPv4 parameter: “ Specific ” , “ Other ” , or “ Range ” the user must enter a valid value in each of the value fields that open for that parameter.
Protocol:
Any UDP TCP Other: Value: IP protocol number: 0-255
Source IP:
Specific:
Value/Mask: Source IP address in value/mask format
Any IP and Mask are in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and 255. When Mask is converted to a 32-bit binary string and read from left to right, all bits following the first zero must also be zero. If a port is configured to match on DMAC/DIP, this field is the Destination IP address. IP Fragment: IPv4 frame fragmented option values: Yes No Any DSCP: Diffserv Code Point (DSCP) values: Specific value Range of values Any Values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
Confidential
User Guide: CE Services
Page 366
Made with FlippingBook interactive PDF creator