Web Interface – Configuration
4.92 Mirroring & Remote Mirroring
This page allows the user to configure the Mirroring parameters for the switch. Mirroring is a feature for switched port analyzer. The administrator can use the Mirroring to debug network problems. The selected traffic can be mirrored or copied on a destination port where a network analyzer can be attached to analyze the network traffic. Remote Mirroring is an extend function of Mirroring. It can extend the destination port in other switch so the administrator can analyze the network traffic on the other switches. If you want to get the tagged mirrored traffic, you have to set VLAN egress tagging as "Tag All" on the reflector port. On the other hand, if you want to get untagged mirrored traffic, you have to set VLAN egress tagging as "Untag ALL" on the reflector port. The traffic to be copied on the mirror port is selected as follows:
Confidential
User Guide: CE Services
Page 371
Made with FlippingBook interactive PDF creator