Web Interface – Configuration
Note1: The Mirroring session shall have either ports or VLANs as sources, but not both.
4.92.3 Remote Mirroring Port Configuration The following table is used for port role selecting.
Port This column displays the logical port to be configured in this row. Source Set or show the mirror mode. Disabled: Neither frames transmitted nor frames received are mirrored. Both: Frames received and frames transmitted are mirrored on the Intermediate/Destination port. Rx only: Frames received on this port are mirrored on the Intermediate/Destination port. Frames transmitted are not mirrored. Tx only: Frames transmitted on this port are mirrored on the Intermediate/Destination port. Frames received are not mirrored.
Note:
For a given port, a frame is only transmitted once. Therefore it is not possible to mirror the mirror port Tx frames. As a result, the mode for the selected mirror port is limited to Disabled or Rx only.
Intermediate Select intermediate port. This checkbox is designed for Remote Mirroring. The intermediate port is a switched port to connect to other switch.
Note: The intermediate port needs to disable MAC Table learning.
Destination Select destination port. This checkbox is designed for mirror or Remote Mirroring. The destination port is a switched port that you receive a copy of traffic from the source port.
Note1: On mirror mode, the device only supports one destination port.
Note2: The destination port needs to disable MAC Table learning.
4.92.4 Configuration Guideline for All Features
When the switch is running on Remote Mirroring mode, the administrator also needs to check whether or not other features are enabled or disabled.
Confidential
User Guide: CE Services
Page 373
Made with FlippingBook interactive PDF creator