Web Interface – Configuration
Flow Sampler Sampling Rate The statistical sampling rate for packet sampling. Set to N to sample on average 1/Nth of the packets transmitted/received on the port. Not all sampling rates are achievable. If an unsupported sampling rate is requested, the switch will automatically adjust it to the closest achievable. This will be reported back in this field. Valid range is 1 to 4294967295. Flow Sampler Max. Header The maximum number of bytes that should be copied from a sampled packet to the sFlow datagram. Valid range is 14 to 200 bytes with default being 128 bytes. If the maximum datagram size does not take into account the maximum header size, samples may be dropped. Counter Poller Enabled Enables/disables counter polling on this port. Counter Poller Interval With counter polling enabled, this specifies the interval - in seconds - between counter poller samples. Valid range is 1 to 3600 seconds.
4.97.4 sFLOW Buttons
Release: See description under Owner. Refresh: Click to refresh the page. Note that unsaved changes will be lost. Save: Click to save all changes. Reset: Click to undo any changes made locally and revert to previously saved values.
Confidential
User Guide: CE Services
Page 384
Made with FlippingBook interactive PDF creator