Command Line Interface
forced:
Force switch normal traffic to protection.
Freeze:
Local Freeze of EPS.
Lockout: Lockout of protection. Lockoutlocal: Local lockout of EPS. Manual:
Manual switch normal traffic to protection.
Manual:
Manual switch normal traffic to working. This is only allowed in case of 'non-revertive' mode.
EPS domain The domain of the EPS. Syntax:
eps <inst> domain { port | tunnel-tp | pw } architecture { 1plus1 | 1for1 } work-flow { <flow_w> | <port_type> <port_w> } protect-flow { <flow_p> | <port_type> <port_p> } port: This EPS is protecting in the Port domain. pw: This EPS is protecting in the MPLS-TP Pseudo-Wire domain. tunnel-tp: This EPS is protecting in the MPLS-TP tunnel domain. EPS holdoff Hold off timer. Syntax: eps <inst> holdoff <hold> <uint>: The hold off timer value in 100 ms. Max 10 sec. EPS mep-work Working MEP instance. Syntax: eps <inst> mep-work <mep_w> mep-protect <mep_p> mep-aps <mep_aps> <uint>: Working MEP instance number. EPS revertive Revertive EPS. Syntax: eps <inst> revertive { 10s | 30s | 5m | 6m | 7m | 8m | 9m | 10m | 11m | 12m | { wtr-value <wtr_value> } } 10m WTR is 10 min. 10s WTR is 10 sec. 11m WTR is 11 min. 12m WTR is 12 min. 30s WTR is 30 sec. 5m WTR is 5 min. 6m WTR is 6 min.
Confidential
User Guide: CE Services
Page 40
Made with FlippingBook interactive PDF creator