Web Interface – Monitor
Port Switch port number. Mode Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude. Source Address IP Address of the source. Currently, the maximum number of IP source address for filtering (per group) is 8. When there is no any source filtering address, the text "None" is shown in the Source Address field. Type Indicates the Type. It can be either Allow or Deny. Hardware Filter/Switch Indicates whether data plane destined to the specific group address from the source IPv4/IPv6 address could be handled by chip or not.
5.46.3 MVR SFM Information Buttons Auto-refresh:
Enable Auto-refresh – to refresh the page automatically every 3 seconds. Disable Auto-refresh (This is the default.)
Refresh : Click to refresh the page immediately. Back Arrows (>>) :
Updates the table starting from the first entry in the MVR
SFM Information Table.
Forward Arrows (|<<) :
Updates the table, starting with the entry after the last
entry currently displayed.
Confidential
User Guide: CE Services
Page 476
Made with FlippingBook interactive PDF creator