Web Interface – Monitor
5.49.2 IGMP SFM Information VLAN ID
This column displays the VLAN ID of the group. Groups This column displays the Group address of the group displayed. Port Switch port number. Mode Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude. Source Address IP Address of the source. Currently, the maximum number of IPv4 source address for filtering (per group) is 8. When there is no source filtering address, the text "None" is shown in the Source Address field.
Type Indicates the Type. It can be either Allow or Deny.
Type Hardware Filter/Switch Indicates whether data plane destined to the specific group address from the source IPv4 address could be handled by chip or not.
5.49.3 IGMP SFM Information Buttons Auto-refresh:
Enable Auto-refresh – to refresh the page automatically every 3 seconds Disable Auto-refresh (This is the default.)
Refresh : Click to refresh the page immediately
):
Back Arrows (
Updates the table, starting with the first entry in the
IGMP SFM Information Table.
Forward Arrows (
): Updates the table, starting with the entry after the last
entry currently displayed.
Confidential
User Guide: CE Services
Page 482
Made with FlippingBook interactive PDF creator