Web Interface – Maintenance
7.4
Software – Image Select
This page provides information about the active and alternate (backup) firmware images in the device, and allows you to revert to the alternate image. The web page displays two tables with information about the active and alternate firmware images.
Note:
¾ In case the active firmware image is the alternate image, only the “ Active Image ” table is shown. In this case, the Activate Alternate Image button is also disabled. ¾ If the alternate image is active (due to a corruption of the primary image or by manual intervention), uploading a new firmware image to the device will automatically use the primary image slot and activate this image. ¾ The firmware version and date information may be empty for older firmware releases. This does not constitute an error.
7.4.1
Software Image Selection Image
This field displays the flash index name of the firmware image. The name of primary (preferred) image is “ image ” , the alternate image is named “ image.bk ” . Version This field displays the version of the firmware image.
Date This field displays the date when the firmware was produced.
7.4.2
Software Image Selection Buttons
Click to use the alternate image. This button may be
disabled depending on system state.
Confidential
User Guide: CE Services
Page 528
Made with FlippingBook interactive PDF creator