Web Interface – Maintenance
7.7
Configuration – Upload
The switch stores its configuration in a number of text files in CLI format. The files are either virtual (RAM-based) or stored in flash on the switch. It is possible to upload a file from the web browser to all the files on the switch, except default-config, which is read-only. This page allows the user to upload a file from the web browser.
Choose File
7.7.1
File to Upload Choose file (
Choose File
) to upload.
7.7.2
Destination File To upload the selected configuration file: 1. Click one of the radio buttons to select the destination file to replace. 2. Click the Upload Configuration button ( ). Download of running-config may take a little while to complete, as the file must be prepared for download. If the destination is running-config, the file will be applied to the switch configuration. This can be done in two ways: Replace mode: The current configuration is fully replaced with the configuration in the uploaded file. Merge mode: The uploaded file is merged into running-config.
Note:
If the file system is full (i.e. contains the three system files mentioned above plus two other files), it is not possible to create new files, but an existing file must be overwritten or another deleted first.
Confidential
User Guide: CE Services
Page 532
Made with FlippingBook interactive PDF creator