Command Line Interface
QoS QCE Set the QoS Control Entry according to Source or Destination MAC address. Syntax: qos qce { [ addr { source | destination } ] [ key { double-tag | normal | ip-addr | mac-ip-addr } ] }*1 The parameters are: addr: setup address match mode source: Match SMAC and SIP (default) destination: Match DMAC and DIP
QoS Queue-Policer Queue Queue policer configuration. Syntax: qos queue-policer queue <queue> <rate> [ kbps | mbps ] <0~7>: Specific queue or range.
QoS Queue-Shaper Queue Set the queue-shaper configuration. Syntax: qos queue-shaper queue <queue> <rate> [ kbps | mbps ] [ excess ] [ rate-type { line | data } ] The parameters are: <0~7>: Specific queue or range <rate>: shaper rate in kbps, values are 100-3,300,000 [ excess ]: allow use of excess bandwidth
QoS Tag-remark Tag remarking configuration. Syntax: qos tag-remark { pcp <pcp> dei <dei> | mapped } mapped: Used mapped values (COS, DPL -> PCP, DEI) pcp: Specify default PCP
QoS Trust Trust configuration. Syntax:
qos trust dscp qos trust tag dscp:
DSCP value
tag:
VLAN tag
Confidential
User Guide: CE Services
Page 63
Made with FlippingBook interactive PDF creator