Command Line Interface
2.3.22.36 (Interface – Port Type) Speed
Configures interface speed. If you use 10, 100, or 1000 keywords with the auto keyword the port will only advertise the specified speeds. Values are: 10: 10Mbps 100: 100Mbps 1000: 1Gbps Auto: auto negotiation Syntax: speed { 10g | 2500 | 1000 | 100 | 10 | auto { [ 10 ] [ 100 ] [ 1000 ] } }
2.3.22.37 (Interface – Port Type) Switchport Set VLAN characteristics.
Switchport Access VLAN Set VLAN access mode characteristics of the interface. Requires the following parameter: vlan: Set VLAN when interface is in access mode, enter the pvid: <pvid>: VLAN ID of the VLAN when this port is in access mode Syntax: switchport access vlan <pvid> Switchport Forbidden VLAN Add or remove forbidden VLANs from the current list of forbidden VLANs. The parameters are: <vlan_list>: VLAN IDs add/remove: add to or remove from the existing list Syntax: switchport forbidden vlan { add | remove } <vlan_list> Switchport Hybrid Acceptable-Frame-Type Set acceptable frame type on a port. Values are: all: allow all frames tagged: allow only tagged frames untagged: allow only untagged frames Syntax: switchport hybrid acceptable-frame-type { all | tagged | untagged }
Confidential
User Guide: CE Services
Page 66
Made with FlippingBook interactive PDF creator