Command Line Interface
2.3.23.5 (Interface – VLAN) IP
Set IPv4 Address configuration.
IP Address Set the IP address configuration. <address>: IP (IPv4) address dhcp:
enable Dynamic Host Configuration Protocol (DHCP)
fallback: dhcp fallback settings <fallback_address> dhcp fallback address (send traffic to this ip address if the DHCP server goes offline) <fallback_netmask> dhcp fallback netmask [ timeout <fallback_timeout>] dhcp fallback timeout, length of time in seconds that the DHCP server can be unresponsive, before traffic will be sent to the fallback address Syntax:
ip address { { <address> <netmask> } | { dhcp [ fallback <fallback_address> <fallback_netmask> [ timeout <fallback_timeout> ] ] } }
IP IGMP Snooping Enable IGMP snooping. Syntax: ip igmp snooping
IP IGMP Snooping Compatibility Syntax: ip igmp snooping compatibility { auto | v1 | v2 | v3 } auto: Compatible with IGMPv1/IGMPv2/IGMPv3
v1: Forced IGMPv1 v2: Forced IGMPv2 v3: Forced IGMPv3
IP IGMP Snooping last-member-query-interval Syntax: ip igmp snooping last-member-query-interval <ipmc_lmqi> <0-31744>: 0 - 31744 tenths of seconds. IP IGMP Snooping Priority Syntax: ip igmp snooping priority <cos_priority> <0-7>: CoS priority ranges from 0 to 7
Confidential
User Guide: CE Services
Page 71
Made with FlippingBook interactive PDF creator