Command Line Interface
<val>: 1-10 seconds.
LLDP Timer Sets LLDP TX interval (The time -in seconds- between each LLDP frame transmitted). Syntax: lldp timer <val>
<val>: 5-32,768 seconds LLDP Transmission-delay
Sets LLDP transmision-delay in seconds. (The amount of time that the transmission of LLDP frames will be delayed after LLDP configuration has changed.) Syntax: lldp transmission-delay <val> <val>: 1-8,192 seconds
2.3.31 Logging
Set syslog parameters. Logging Host Select the host to be logged. Syntax: logging host { <v_ipv4_ucast> | <v_word45> } <ipv4_ucast> IP address of the log server <v_word45> Logging Level Set the level of logging. Syntax: logging level { info | warning | error } error: Severity 3: Error conditions informational: Severity 6: Informational messages notice:
<hostname> Donain name of the log server
Severity 5: Normal but significant condition
warning:
Severity 4: Warning conditions
Logging On Enable syslog server Syntax: logging on
2.3.32 Loop-Protect
Loop protection configuration. Syntax:
Confidential
User Guide: CE Services
Page 81
Made with FlippingBook interactive PDF creator