Command Line Interface
source:
MIRROR source interface, VLAN
interface:
<port_type>, values are: *
All switches or all ports
GigabitEthernet:
set specific Gigabit Ethernet Port number
<in_port_type>: port list in 1/1-8 (monitor destination) <v_port_type_list>: port list in 1/1-8 (monitor source) both: setting source port to both will mirror both ingress and egress traffic rx: setting source port to rx will mirror ingress traffic tx: Setting source port to tx will mirror egress traffic
2.3.36 MVR
Multicast VLAN Registration configuration.
2.3.36.1 MVE Name
MVR multicast name. Syntax: mvr name <mvr_name> channel <profile_name> mvr name <mvr_name> frame priority <cos_priority> mvr name <mvr_name> frame tagged mvr name <mvr_name> igmp-address <v_ipv4_ucast> mvr name <mvr_name> last-member-query-interval <ipmc_lmqi> mvr name <mvr_name> mode { dynamic | compatible } <word16>: MVR multicast VLAN name. Input: 0* (config)# mvr name word ? Output: MVR Name Channel MVR channel configuration. Syntax: mvr name <mvr_name> channel <profile_name> <word16>: Profile name in 16 characters. MVR Name Frame MVR control frame in TX. Syntax: mvr name <mvr_name> frame priority <cos_priority> mvr name <mvr_name> frame tagged priority: Interface CoS priority <0-7>: CoS priority ranges from 0 to 7. tagged: Tagged IGMP/MLD frames will be sent.
MVR Name IGMP-Address MVR address configuration used in IGMP. Syntax: mvr name <mvr_name> igmp-address <v_ipv4_ucast> <ipv4_ucast>: A valid IPv4 unicast address.
Confidential
User Guide: CE Services
Page 84
Made with FlippingBook interactive PDF creator