Deny:
Forwarding is denied
Rate Limiter ID Set or show the rate limiter to apply on this port. The Rate Limiter can be Disabled or set to a value from 1 through 16. The default value is “Disabled”. Port Redirect Set or show which port frames are redirected on. The Port Redirect can be Disabled or set to a specific port number. It cannot be set when “Action” is permitted. The default value is “Disabled”.
Mirror Set or show the mirror operation of this port:
Enabled: Frames received on the port are mirrored Disabled: Frames received on the port are not mirrored The default value is “Disabled”. Logging Set or show the logging operation of this port: Enabled: Frames received on the port are stored in the System Log Disabled: Frames received on the port are not logged (The default value is “Disabled”.)
Note:
The logging message does not include the 4 bytes CRC.
The logging feature only works when the packet length is less than 1518(without VLAN tags) and the System Log memory size and logging rate is limited.
Shutdown Set or show the port shut down operation of this port:
Enabled: If a frame is received on the port, the port will be disabled Disabled: Port shut down is disabled (The default value is “Disabled”.)
Note:
The shutdown feature only works when the packet length is less than 1518(without VLAN tags).
State Set or show the port state of this port. Enabled: To reopen ports by changing the volatile port configuration of the ACL user module (The default value is “Enabled”.) Disabled: To close ports by changing the volatile port configuration of the ACL user module Counter The Counter counts the number of frames that match this ACE.
SMB - CLI UM
Rev: 1.1
Page 114 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator