Port This column displays the switch port number. Router Port Set or show which ports act as router ports.
Enable – the port is a Router port
Disable – the port is not a Router port (This is the default.) A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP Querier. If an aggregation member port is selected as a router port, the whole aggregation will act as a router port. Fast Leave Set or show whether a port has Fast Leave processing.
Enable the Fast Leave on the port
Disable the Fast Leave on the port (This is the default.) Multicast snooping Fast Leave processing allows the switch to remove an interface from the forwarding table entry without first sending out group specific queries to the interface. The VLAN interface is pruned from the multicast tree for the multicast group specified in the original leave message. Fast-leave processing ensures optimal bandwidth management for all hosts on a switched network, even when multiple multicast groups are in use simultaneously. This processing applies to IGMP and MLD.
4.30.3
IGMP Snooping Configuration Buttons Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
SMB - CLI UM
Rev: 1.1
Page 149 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator