4.34
VLANs –VLAN Configuration
This page allows the user to control the VLAN configuration on the switch stack. It is divided into a global section and a per-port configuration section.
4.34.1
Global VLAN Configuration Allowed Access VLANs
Set or show the allowed Access VLANs. “Allowed Access VLANs” only affect ports configured as Access Ports (for an explanation of Access Ports see the online help). Ports in other modes are members of all VLANs specified in the Allowed VLANs field. By default, only VLAN 1 is enabled. More VLANs may be added by using list syntax where the individual elements are separated by commas. Ranges are specified with a dash separating the lower and upper bound. The following example will add VLANs 1, 10, 11, 12, 13, 200, and 300 to the list of Allowed Access VLANs: 1, 10-13,200,300. Spaces are allowed in between the delimiters. Ethertype for Custom S-ports Set or show the ethertype/TPID (specified in hexadecimal) used for Custom S- ports. The setting is in force for all ports whose Port Type is set to S-Custom-Port. Port VLAN Configuration This section allows the user to configure the VLAN Parameters per port: P ort This field displays the logical port number of this row. Mode Set or show the port mode (default is Access) to determine the fundamental behavior of the port in question. The remaining fields in that row will be either grayed out or made changeable depending on the mode selected.
4.34.2
SMB - CLI UM
Rev: 1.1
Page 159 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator