4.36
Private VLANs – Membership
In a private VLAN, PVLANs provide layer 2 isolation between ports within the same broadcast domain. Isolated ports configured as part of PVLAN cannot communicate with each other. Member ports of a PVLAN can communicate with each other.
4.36.1
Port Isolation Configuration From this page the user can enable or disable port isolation on ports in a Private VLAN. A port member of a VLAN can be isolated to other isolated ports on the same VLAN and Private VLAN.
Port Number A check box is provided for each port of a private VLAN.
Port Isolation is enabled on that port
Port Isolation is disabled on that port By default, port isolation is disabled on all ports. Port Isolation Configuration Buttons Auto-refresh:
4.36.2
Enable Auto-refresh - refresh the page automatically every 3 seconds Disable Auto-refresh (This is the default.)
Refresh : Click to refresh the page immediately Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
SMB - CLI UM
Rev: 1.1
Page 166 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator