4.40
QoS – Port Shaping
This page provides an overview of QoS Egress Port Shapers for all switch ports.
4.40.1
QoS Egress Port Shapers The displayed settings are:
Port Displays the logical port for the settings contained in the same row. Click on the port number in order to configure the shapers. The QoS Egress Port Schedulers and Shapers page opens. For an explanation of this page, see section 4.39.2 QoS Egress Port Schedulers and Shapers Page on page 172. Qn Shows “disabled” or actual queue shaper rate - e.g. “800 Mbps”.
Port Shows “disabled” or actual port shaper rate - e.g. “800 Mbps”.
4.41
QoS Control List
This page shows the QoS Control List (QCL), which is made up of the QoS Control Entries (QCEs). Each row describes a QCE that is defined. The maximum number of QCEs is 256 on each switch. Click on the lowest plus sign to add a new QCE to the list (the QCE Configuration page opens, see the described in section 4.41.2 on page 179).
SMB - CLI UM
Rev: 1.1
Page 175 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator