4.42
QoS – Storm Control
This page allows the user to configure the Storm control parameters for the switch. There is a unicast storm rate control, multicast storm rate control, and a broadcast storm rate control. These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table. The configuration indicates the permitted packet rate for unicast, multicast or broadcast traffic across the switch.
4.42.1
Storm Control Configuration The displayed settings are:
Frame Type This column displays the Frame Type to be configured in this row. The Frame Types are:
Unicast
Multicast
Broadcast.
Enable Enable or disable the storm control status for the given frame type.
Enabled – the storm control status is enabled
Disabled – the storm control status is disabled (This is the default.)
SMB - CLI UM
Rev: 1.1
Page 185 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator