4.43
Mirroring
This page allows the user to configure the Mirroring parameters for the switch. To debug network problems, selected traffic can be copied, or mirrored, to a mirror port where a frame analyzer can be attached to analyze the frame flow. The traffic to be copied on the mirror port is selected as follows: All frames received on a given port (also known as ingress or source mirroring). All frames transmitted on a given port (also known as egress or destination mirroring).
4.43.1
Mirror Configuration The displayed settings are:
Port to mirror to Set or show the port destination (also known as the mirror port) for frames that are mirrored. Frames from ports that have either source (rx) or destination (tx) mirroring enabled are mirrored on this port. Setting the “Disabled” option disables mirroring.
4.43.2
Mirror Port Configuration Port This column displays the logical port to be configured in this row.
Mode Set or show the mirror mode.
SMB - CLI UM
Rev: 1.1
Page 187 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator