2.3.3.4
Access-List ACE Ingress Set the ingress configuration for the ACL. Syntax: access-list ace <ace_id> ingress { any | interface {* | gigabitethernet <port-list>} } <ace_id>: ID of ace entry, value can be 1-256 ingress options: any: do not care which ingress interface interface: <port_type>, values are: * All switches or all ports
GigabitEthernet: set specific Gigabit Ethernet Port number <port-list> port list in 1/1-8
2.3.3.5
Access-List ACE Logging Set the ACL logging configuration. Syntax: access-list ace <ace_id> logging <ace_id>:
ID of ace entry, value can be 1-256
Note:
The logging feature only works when the packet length is less than 1518 (without VLAN tags) and the System Log memory size and logging rate is limited.
2.3.3.6
Access-List ACE Mirror Mirror frame to destination mirror port according to the ACL. Syntax: access-list ace <ace_id> mirror <ace_id>: ID of ace entry, value can be 1-256 Access-List ACE Next Insert the current ACE before the next ACE ID, values are: Syntax: access-list ace <ace_id> next { <ace_id_next> | last} <ace_id>: ID of ace entry, value can be 1-256 <ace_id_next >: the next ID, values can be: 1-256 last: place the current ACE to the end of access list
2.3.3.7
2.3.3.8
Access-List ACE Policy Set the ACE Policy ID. Syntax: access-list ace <ace_id> policy <policy_id> <ace_id>: ID of ace entry, value can be 1-256
SMB - CLI UM
Rev: 1.1
Page 19 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator