Frame Type This column shows the type of frame. Possible values are: Any: Match any frame type. Ethernet: Match EtherType frames. LLC: Match (LLC) frames. SNAP: Match (SNAP) frames. IPv4: Match IPv4 frames. IPv6: Match IPv6 frames. Action This column shows the classification action taken on ingress frame if parameters configured are matched with the frame’s content. Possible actions are: CoS: Classify Class of Service DPL: Classify Drop Precedence Level DSCP: Classify DSCP value Conflict This column shows Conflict status of QCL entries. Since H/W resources are shared by multiple applications, the resources required to add a QCE may not be available when needed. In that case the conflict status is “Yes”, otherwise the conflict status “No”.
Note:
To resolve conflict, click the Resolve Conflict button which releases the H/W resources required to add a QCL entry.
5.11.2
Queuing Counters Buttons
Select the QCL status from the drop down list (Combined, Static, Conflict).
Resolve Conflict:
Click to release the resources required to add QCL entry, in case the conflict status for any QCL entry is ‘yes’.
Auto-refresh:
Enable Auto-refresh – to refresh the page automatically every 3 seconds Disable Auto-refresh (This is the default.)
Refresh : Click to refresh the page immediately
5.12
Ports – Detailed Statistics
This page provides detailed traffic statistics for a specific switch port. Use the port select box to select which switch port details to display.
SMB - CLI UM
Rev: 1.1
Page 205 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator