2.3.3.13
Access-List ACE Tag-Priority Set the ACE according to packet’s tag priority. Syntax: access-list ace <ace_id> tag-priority <tag_priority_value > <ace_id>: ID of ace entry, value can be 1-256 <tag_priority_value>: 0-1: the range of tag priority 0-3: the range of tag priority 2-3: the range of tag priority 4-5: the range of tag priority 4-7: the range of tag priority 6-7: the range of tag priority 0-7: the value of tag priority, value may be any single number from 1 thru 7 any: don not-care the value of tag priority field
2.3.3.14
Access-List ACE VID Set the ACE according to packet’s VLAN ID. Syntax: access-list ace <ace_id> vid {<vid> | any} <vid>: the value(s) of VID field, values are: 1-4095 any: do not-care the value of VID field
2.3.4
Access-List Rate-Limiter Set the Access (Control) List Rate Limiter. Syntax:
access-list rate-limiter [ <rate_limiter_list> ] { pps <pps_rate> | 100pps <pps100_rate> | kpps <kpps_rate> | 100kbps <kpbs100_rate> } [<rate_limiter_list> ]: rate limiter id, values are 1-16 pps: packets per second kpps: thousands of packets per second 100kbps: 100k bits per second
2.3.5
Aggregation Set Link Aggregation (LAG) parameters. Syntax: aggregation mode { [ smac ] [ dmac ] [ ip ] [ port ] } mode: Traffic distribution mode [smac]: source MAC affects the distribution [dmac]: destination MAC affects the distribution [ip]: IP address affects the distribution [port]: IP port affects the distribution
SMB - CLI UM
Rev: 1.1
Page 21 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator