Frame Type This column shows the frame type of the ACE. Possible values are: Any: The ACE will match any frame type EType: The ACE will match Ethernet Type frames. ARP: The ACE will match ARP/RARP frames IPv4: The ACE will match all IPv4 frames
IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol IPv4/UDP: The ACE will match IPv4 frames with UDP protocol IPv4/TCP: The ACE will match IPv4 frames with TCP protocol IPv4/Other: The ACE will match IPv4 frames, which are not ICMP/UDP/TCP IPv6: The ACE will match all IPv6 standard frames.
Note:
An Ethernet Type based ACE will not get matched by IP and ARP frames.
Action This column shows the forwarding action of the ACE. Possible values are: Permit: Frames matching the ACE may be forwarded and learned Deny: Frames matching the ACE are dropped Filter: Frames matching the ACE are filtered Rate Limiter This column shows the rate limiter number of the ACE. The allowed range is 1 to 16. When Disabled is displayed, the rate limiter operation is disabled. Port Redirect This column shows the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. The allowed values are: Disabled: The port redirect operation is disabled Specific port number: Frames will be redirected to this port number Mirror This column shows the mirror operation of this port. The allowed values are: Enabled: Frames received on the port are mirrored Disabled: Frames received on the port are not mirrored The default value is “Disabled”. CPU Forward packet that matched the specific ACE to CPU. CPU Once Forward first packet that matched the specific ACE to CPU. Counter This column shows the number of times the ACE was hit by a frame.
SMB - CLI UM
Rev: 1.1
Page 219 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator