2.3.13.3
green-ethernet led on-event Specifies when to turn LEDs on at 100% intensity. Syntax: green-ethernet led on-event { [ link-change <v_0_to_65535> ] [ error ] }*1 link-change: specifies how long to turn LEDs intensity to 100%, when a link changes state <v_0_to_65535>: number of seconds to set LEDs intensity to 100% at link change, values 0 to 65,535 [ error ]: set LEDs intensity to 100% if an error occurs
2.3.14
Help Description of the interactive help system Syntax: help
2.3.15
Hostname Set system's network name. Syntax: hostname <hostname>
2.3.16
Interface – Port Type Select an interface to configure. Syntax: interface ( <port_type> [ <plist> ] ) interface: <port_type>, values are: *
All switches or all ports GigabitEthernet: set specific Gigabit Ethernet Port number <plist> port list in 1/1-8
Input:
AMP8MG(config)# interface *
Or Input: AMP8MG(config)# interface gigabitethernet 1/8 Output (prompt change to interface mode – port type): AMP8MG(config-if)#
2.3.16.1
(Interface – Port Type) Access-List The following access-list options are available: Access-List Action Set the access-list action. Syntax: access-list action <deny | permit>
SMB - CLI UM
Rev: 1.1
Page 25 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator