7.5
Configuration – Save Startup-Config
The switch stores its configuration in a number of text files in CLI format. The files are either virtual (RAM-based) or stored in flash on the switch. There are three system files: running-config: A virtual file that represents the currently active configuration on the switch. This file is volatile. startup-config: The startup configuration for the switch, read at boot time. default-config: A read-only file with vendor-specific configuration. This file is read when the system is restored to default settings. It is also possible to store up to two other files and apply them to running-config, thereby switching configuration. This page allows the user to copy the running-config to the startup-config and save it, thereby ensuring that the currently active configuration will be used at the next reboot.
7.5.1
Save Running Configuration to Startup-Config
Click
to copy the running-config to the startup-config and save
it.
SMB - CLI UM
Rev: 1.1
Page 269 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator