active:
transmit LACP BPDUs continuously
passive:
wait for neighbor LACP BPDUs before transmitting
Syntax: lacp role { active | passive }
LACP Timeout Set the period between BPDU transmissions. Values are: fast: transmit BPDU each second (fast timeout) slow: transmit BPDU each 30th second (slow timeout) Syntax: lacp timeout { fast | slow }
2.3.16.14
(Interface – Port Type) LLDP Set LLDP configurations. The following options are available: receive: enable/disable decoding of received LLDP frames tlv-select: which optional TLVs to transmit, the values are: port-description: enable/disable transmission of port description system-capabilities: enable/disable transmission of system capabilities system-description: enable/disable transmission of system description system-name: enable/disable transmission of system name transmit: enable/disable transmission of LLDP frames Syntax: lldp receive lldp tlv-select { management-address | port-description | system- capabilities | system-description | system-name } lldp transmit
2.3.16.15
(Interface – Port Type) Loop-Protect Set the loop protection configuration on the port. loop-protect:
enable loop protection configuration on this port
loop-protect action:
action to take if loop detected, values are:
shutdown: shutdown port log: generate log
loop-protect tx-mode:
actively generate PDUs
Syntax: loop-protect loop-protect action { [ shutdown ] [ log ] }*1 loop-protect tx-mode
2.3.16.16
(Interface – Port Type) MAC Set the MAC security mode. address-table:
MAC table configuration
learning:
port learning mode
SMB - CLI UM
Rev: 1.1
Page 30 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator