Syntax: ip route <v_ipv4_addr> <v_ipv4_netmask> <v_ipv4_gw> <v_ipv4_addr>: Network <v_ipv4_netmask>: Netmask <v_ipv4_gw>: Gateway Lacp Set the LACP settings. lacp system-priority Syntax: lacp system-priority <v_1_to_65535> <v_1_to_65535>: Priority value, lower means higher priority, values are: 1 to 65,535
2.3.19
2.3.20
Line Configure a terminal line. Syntax: line { <0~16> | console 0 | vty <0~15> } <0~16>: list of line numbers console 0: console line number vty:
virtual terminal, list of vty numbers, values 0-15
2.3.21
Lldp LLDP configurations. lldp holdtime Sets LLDP hold time (The neighbor switch will discarded the LLDP information after “hold time” multiplied with “timer” seconds.). Syntax:
lldp holdtime <val> <val> 2-10 seconds.
LLDP Reinit LLDP tx reinitialization delay in seconds. Syntax:
lldp reinit <val> <val> 1-10 seconds.
LLDP Timer Sets LLDP TX interval (The time -in seconds- between each LLDP frame transmitted). Syntax: lldp timer <val> <val> 5-32,768 seconds
SMB - CLI UM
Rev: 1.1
Page 42 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator