| af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | default } ] [ policy { <action_policy> | default } ] }*1 ]
[ update ] }
update an existing QCE
<qce_id>
QCE ID, values are 1-256
QoS Storm Set the QoS storm policer configuration. Syntax: qos storm { unicast | multicast | broadcast } { { <rate> [ kfps ] } | { 1024 kfps } } unicast: police unicast frames
multicast: police multicast frames broadcast: police broadcast frames <rate>:
1024 kfps (Policer rate is < 1,2,4,8,16,32,64,128,256,512> (default fps))
[ kfps ]: rate is kfps
2.3.30
Radius-Server Configure RADIUS. The radius-server has the following options: Radius-Server Attribute Set the attributes to be used in the RADIUS Access-Request packets. Syntax:
radius-server attribute 32 <id> radius-server attribute 4 <ipv4> <ipv4>: <ipv4 address> <id>:
< an NAS identifier from 1 to 253 characters>
Radius-Server Deadtime Set the time to stop using a RADIUS server that does not respond. Syntax: radius-server deadtime <minutes> <minutes>: Time in minutes, value from 1-1,440 Radius-Server Host Specify a RADIUS server. Syntax: radius-server host <host_name> [ auth-port <auth_port> ] [ acct-port <acct_port> ] [ timeout <seconds> ] [ retransmit <retries> ] [ key <key> ] <host_name>: host name or IP address, from 1 to 255 characters [ auth-port <auth_port> ]: UDP port for RADIUS authentication server <auth_port>: value of UDP port number can be 0-65,535 [ acct-port <acct_port> ]: UDP port for RADIUS accounting server <acct_port>: value of UDP port number can be 0-65,535
SMB - CLI UM
Rev: 1.1
Page 50 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator