THE SERIES
UFIBER
Deburring Tools - NOGA ULTIMATE SERIES
UFIBER Tool Holders Support Pilot Hole Diameters Ød Ranging from Ø8.0-25.0mm (0.315-0.984”)
UFIBER
POINT BRUSHES
● Available Range: Ø1.0, 1.5, 2.0, 2.5, 3.0 mm / cutter marks, polishing, and finishing parts with small or narrow geometrical features. Suitable for use in CNC machines, robots or hand-held rotary tools. ● Available Range: Ø1.0, 1.5, 2.0, 2.5, 3.0 mm / cutter marks, polishing, and finishing parts with small or narrow geometrical features. Suitable for use in CNC machines, robots or hand-held rotary tools. Suitable for precision work in small or complex geometrical areas. Ideal for removing Through-hole Back Countersink or Chamfering 0.039, 0.059, 0.079, 0.098, 0.118” and 10 grit sizes for each diameter. LTIMATE THE SERIES POINT BRUSHES POINT BRUSHES Point Brushes Suitable for precision work in small or complex geometrical areas. Ideal for removing cutter marks, polishing, and finishing parts with small or narrow geometrical features. Suitable for use in CNC machines, robots or hand-held rotary tools. • Available Range: Ø1.0, 1.5, 2.0, 2.5, 3.0 mm / 0.039, 0.059, 0.079, 0.098, 0.118” and 10 grit sizes for each diameter. Through-hole Back Counterbore or Spotfacing cutter marks, polishing, and finishing parts with small or narrow geometrical features. Suitable for use in CNC machines, robots or hand-held rotary tools. Front and Back Deburring Ød Range of Ø2.5-25mm (0.098-0.984") Suitable for precision work in small or complex geometrical areas. Ideal for removing Suitable for precision work in small or complex geometrical areas. Ideal for removing
THE
Ceramic Fiber Brushes For Inner-holes, Cross-holes Ød Range of: Ø1-20mm (0.0394-0.787”) For Surfaces Ød Range of Ø6-100mm (0.236-3.937”) Available in 10 Grit Levels from #150 to #6000
0.039, 0.059, 0.079, 0.098, 0.118” and 10 grit sizes for each diameter.
Diameters from Ø8.5-57.5mm (0335-2.264”) ● Available Range: Ø1.0, 1.5, 2.0, 2.5, 3.0 mm / Semi-Standard or Tailor-made Inserts Diameters from Ø8.5-46.0mm (0.335-1.811”) Available with Standard 82° and 90° Countersink Inserts
Ød END BRUSHES
Ød 0.039, 0.059, 0.079, 0.098, 0.118” and 10 grit sizes for each diameter.
Ød
Ød
END BRUSHES Designed for use with hand-held rotary tools and CNC machines, making it ideal for precise finishing Tool Holders Support Pilot Hole Diameters Ød Ranging from Ø8.0-25.0mm (0.315-0.984”)
Through-hole Back Counterbore or Spotfacing End Brushes END BRUSHES Designed for use with hand-held rotary tools and CNC machines, making it ideal for precise finishing tasks, especially in tight or recessed areas where traditional brushes may fall short. This brush features high bending strength and can operate at max. 12000 RPM without the risk of filament breakage. • Available Range: Ø5mm / 0.197” - flat surface or 90°angled and 10 grit sizes for each diameter. Designed for use with hand-held rotary tools and CNC machines, making it ideal for precise finishing tasks, especially in tight or recessed areas where traditional brushes may fall short. tasks, especially in tight or recessed areas where traditional brushes may fall short. This brush features high bending strength and can operate at max. 12000 RPM without the risk of filament breakage. FLAT DESIGN FLAT DESIGN: Designed for uniform deburring and finishing of flat surfaces and large areas. WIDE CONTACT AREA: The flat edge ensures consistent and even surface treatment. Diameters from Ø8.5-46.0mm (0.335-1.811”) Available with Standard 82° and 90° Countersink Inserts This brush features high bending strength and can operate at max. 12000 RPM without the risk of filament breakage. Diameters from Ø8.5-57.5mm (0335-2.264”) Ceramic Fiber Brushes For Inner-holes, Cross-holes Ød Range of: Ø1-20mm (0.0394-0.787”) For Surfaces Ød Range of Ø6-100mm (0.236-3.937”) Available in 10 Grit Levels from #150 to #6000 Through-hole Back Counterbore or Spotfacing Diameters from Ø8.5-57.5mm (0335-2.264”) Ceramic Fiber Brushes For Inner-holes, Cross-holes Ød Range of: Ø1-20mm (0.0394-0.787”) For Surfaces Ød Range of Ø6-100mm (0.236-3.937”) Available in 10 Grit Levels from #150 to #6000 ØD±0.1mm (0.004") Up to 2.3xØd ØD α ° This brush features high bending strength and can operate at max. 12000 RPM without the risk of filament breakage. Designed for use with hand-held rotary tools and CNC machines, making it ideal for precise finishing tasks, especially in tight or recessed areas where traditional brushes may fall short.
Through-hole Back Countersink or Chamfering
● Available Range: Ø5mm / 0.197" - flat surface or 90° angled and 10 grit sizes for each diameter
Diameters from Ø8.5-46.0mm (0.335-1.811”) Available with Standard 82° and 90° Countersink Inserts
Semi-Standard or Tailor-made Inserts ● Available Range: Ø5mm / 0.197" - flat surface or 90° angled and 10 grit sizes for each diameter Ød VERSATILE USAGE: Suitable for smoothing outer edges, planar surfaces and broader geometries. ● Available Range: Ø5mm / 0.197" - flat surface or 90° angled and 10 grit sizes for each diameter Ød FLAT DESIGN Ød Through-hole Back Countersink or Chamfering Semi-Standard or Tailor-made Inserts Ød Ød Ød Front and Back Deburring Ød Range of Ø2.5-25mm (0.098-0.984")
Ød
ØD±0.1mm (0.004") Up to 2.3xØd FLAT DESIGN: Designed for uniform deburring and finishing of flat surfaces and large areas. WIDE CONTACT AREA: The flat edge ensures consistent and even surface treatment. VERSATILE USAGE: Suitable for smoothing outer edges, planar surfaces and broader geometries. FLAT DESIGN FLAT DESIGN: Designed for uniform deburring and finishing of flat surfaces and large areas. WIDE CONTACT AREA: The flat edge ensures consistent and even surface treatment. VERSATILE USAGE: Suitable for smoothing outer edges, planar surfaces and broader geometries. ANGLED DESIGN: Allows for easy access to tight spaces and hard-to-reach areas. ENHANCED CONTROL: The pointed edge provides better control for selective deburring tasks. VERSATILITY: Suitable for deburring geometries with complex shapes and sharp angles. ANGLED DESIGN ANGLED DESIGN ANGLED DESIGN: Allows for easy access to tight spaces and hard-to-reach areas. ENHANCED CONTROL: The pointed edge provides better control for selective deburring tasks. VERSATILITY: Suitable for deburring geometries with complex shapes and sharp angles. ANGLED DESIGN: Allows for easy access to tight spaces and hard-to-reach areas. ENHANCED CONTROL: The pointed edge provides better control for selective deburring tasks. VERSATILITY: Suitable for deburring geometries with complex shapes and sharp angles. ANGLED DESIGN ANGLED DESIGN: Allows for easy access to tight spaces and hard-to-reach areas. ENHANCED CONTROL: The pointed edge provides better control for selective deburring tasks. VERSATILITY: Suitable for deburring geometries with complex shapes and sharp angles. ANGLED DESIGN ØD α ° ØD±0.1mm (0.004") Up to 2.3xØd FLAT DESIGN: Designed for uniform deburring and finishing of flat surfaces and large areas. WIDE CONTACT AREA: The flat edge ensures consistent and even surface treatment. VERSATILE USAGE: Suitable for smoothing outer edges, planar surfaces and broader geometries. FLAT DESIGN
Ceramic Fiber Brushes For Inner-holes, Cross-holes Ød Range of: Ø1-20mm (0.0394-0.787”) For Surfaces Ød Range of Ø6-100mm (0.236-3.937”) Available in 10 Grit Levels from #150 to #6000
Ø
Ød
15
ØD α °
15
15
SCAN QR CODE FOR MORE INFORMATION >
85
t: 020 8400 2020
f: 020 8400 2021
e: sales@lineartools.co.uk
w: www.lineartools.co.uk 4
Made with FlippingBook - Online magazine maker