Ceiling Enclosures & Finished Backs
Ceiling Enclosures
The ceiling enclosures are available in two types: for standard fume hoods and also for those fume hoods utilizing the optional Air Chamber. Both enclosures conceal and protect the hood ductwork, electrical conduit and other supply lines.
STEP 1 PAINTED ANGLE BOLTS TO WALL 2 PLACES
Example:
Height
CE-48-18
Width
STEP 2 ENCLOSURE END SCREWS TO OUTSIDE OF PAINTED ANGLE AND SCREWS DOWN TO TOP EDGE OF HOOD
STEP 1 PAINTED ANGLE BOLTS TO WALL 2 PLACES
STEP 2 ENCLOSURE END SCREWS TO OUTSIDE OF PAINTED ANGLE AND SCREWS DOWN TO TOP EDGE OF HOOD
STEP 3 ENCLOSURE FRONT SCREWS TO ENCLOSURE ENDS ON THE SIDE FLANGES OF THE END ENCLOSURES
Finished Back
Finished backs are used to close off the back of the fume hood, giving it a finished look when located in the center of a room.
Example:
*Width will be the same width as fume hood.
FINBACK-48
Width
6
Made with FlippingBook Digital Proposal Creator