Base Cabinets
Sink Base Cabinets and Sink Support Assemblies
Sink base cabinets are factory-equipped to accept a variety of sink styles and shapes. The back of the cabinet is open to allow access to plumbing and electrical services, and the cabinet sides are equipped with support channels to provide attachment for sink support assemblies. Sink support assemblies are sold separately and consist of two parts: threaded rod hangers and sink supports.
Sink Back Panel (installs into slots at the back of the cabinet)
Support Channel
Sink supports are mounted using the threaded rod hangers. These hangers are formed at the top to hang on the support channels that are on the inside (top) of the sink base cabinet. The hangers are extra long to allow for varying sink depths. By adjusting the level of the nuts and washers at the bottom of the hangers, the sink supports are raised or lowered to accommodate the sink. The hangers should be adjusted and the sink should be in place before setting the
Threaded Rod Hanger
Sink Support
counter top. Allow at least 1” of clearance from the top of the sink to the top of the cabinet (i.e., the sink should be 1” or more below the top of the cabinet).
Nut/Washer
10
Made with FlippingBook interactive PDF creator