Wall Cases
Installing Wall Case Sloping Tops After securing the wall case to the wall, any sloping tops may be installed as follows. Steps: 1. Using #8 sheet metal screws, attach filler clips to the top of the wall case along the front edge and the two sides, as shown below. 2. Install the sloping top by slipping the flanged edges of the top into the front filler clips. 3. Install the end caps on the right and left sides by slipping the flanged edges of the caps into (a) the filler clips attached to the top edges of the wall case in Step A, and (b) the filler strips that are attached to the underside of the sloping top.
1
Attach filler clip to the top of the wall case.
3
2
Slip the flanged edge of the top into the front filler clips.
Install the end caps.
19
Made with FlippingBook interactive PDF creator