3
The adjustment knob is located at the top of the top metal plate, as shown in the picture below. To adjust for MORE PRESSURE , turn the knob CLOCKWISE and for LESS PRESSURE , turn it ANTI-CLOCKWISE .
Make sure your pressure is set correctly before switching your press on.
PRESSING PENS:
1. Use PVC (hard plastic) / recycled paper pens.
2. For use with Full colour Multi-trans, pre-heat heat press to 150°C and set the timer to 20 seconds . 3. Use MEDIUM pressure (guideline only). 4. Cut out and attach the print to the pen with heat tape (the heat tape must not cover any part of the design itself). 5. Place the pens on the bottom rubber in the slots.
6. Close the press and make sure the top rubber pad lines up with your print to cover it completely when press is closed.
Made with FlippingBook - professional solution for displaying marketing and sales documents online