This is an interactive catalogue showcasing all our printing solutions offered to you. Click the links and videos within the catalogue for more information.
Email: techsupport@jgelectronics.com
Tel: 011 789 6033
Web: www.jgelectronics.com Fax: 011 781 3065 _______________________________________________________________________________________
Instructions for: Press-Econo-Cap Pro DE
1. To set the temperature, press this button once and you will see that the temperature number flashes.
2. Use the Up/Down arrow to set the correct temperature for the specific product.
3. To set the temperature, press this button again and you will see that the Time (seconds) will flash.
4. After the time is set, press this button again and wait for the press to heat up.
5. To set the pressure. Turn the knob clockwise to give more pressure and anti- clockwise to give less pressure.
6. To place the cap over the base of the press, let the front of the cap fold over the base of the press.
7. On the right-hand side, you will find a black lever with a black knob. Bring the knob forward towards you.
8. Hook the back of the cap over the extended foot of the lever and pull the lever back again to stretch and hold the cap.
9. To replace the cap elements with the flat press elements, switch off the press and wait for the cap attachments to cool down completely before you remove them.
10. You will find two screws at the bottom base element, unscrew it and take the bottom element out.
Bottom element removed.
11. Take the flat base element (the black one) and slide it into the press. Make sure the longer side is sliding in towards you. Make sure you tighten the screws again.
12. Remove the top element by unscrewing the cable first.
13. Unscrew the black knobs and pull out the top element.
Top element removed
14. Insert the top element of the flat attachments (the green flat element). Use the same black knobs that were used on the cap attachment to secure this element.
15. Plug the cable into the press and set your time and temperature the same way as for the cap attachment. Follow steps 1 to 5.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9Made with FlippingBook - professional solution for displaying marketing and sales documents online