SET UP INSTRUCTIONS
Read Instructions First
The Vecta is a mobile cart that allows you to take the Multi-Sensory experience from room to room. The Vecta cart comes fully assembled with most of the equipment already installed. The Vecta has a UL power distribution and hospital-grade protection bar that allows you to plug all of the equipment into one fused power supply. SHIPPING LIST Vecta Deluxe includes: 48” Interactive Bubble Tube Ping Pong Insert Balls/Beads
4-Button Wired Color Controller Bluetooth Amplifiers & Speakers Vecta Cart 100 Tail, 2M Fiber Optic Spray with Light Source Acrylic Mirrors 12’ Electrical Cord Hospital Grade Power Strip TIDY BOX (rear of Vecta) OPTI Solar 80 Projector Effects Wheels Color Controller Funnel Bubble Tube Cleaner (9BCC) Key to Tidy Box
Step 1: •
Remove Vecta Unit from original box.
• Locate the TIDY BOX in the rear of the Vecta. Key is on hook above cabinet. • Remove all items from the Tidy Box. • Verify that you received everything on the Shipping List.
Step 2: • Plug in the Vecta to make sure it is operational. Watch for lights to come on in the Bubble Tube base and listen for the pump motor to come on. Watch for the lights to come on in the fiber optic tails.
Step 3: BUBBLE TUBE •
Locate Bubble Tube stopper plug at the top of the Vecta stand. • Remove stopper plug on top shelf and insert funnel. Add 2 oz. of Bubble Tube Additive into the Bubble Tube via the funnel. • Add approximately 5 gallons of DISTILLED WATER ONLY . Stop approximately 3” from the top. (Purchase an extra gallon to add when the water evaporates.) Add water while the unit is running. • Speed adjustment is the black knob on the front of the Bubble Tube base. Allows you to regulate the flow of bubbles to customize the sensory/distraction session. • Switch jack is located in the front of the Bubble Tube base will accommodate any ¼” jack switch. For 1/8” jack switches, you can purchase a jack adaptor from your local electronics store. All TFH Switches come with the jack adaptor. • 4-Button Wired Color Controller connection is the larger of the two “telephone” jacks. The smaller one is for factory use only.
Step 4: COLOR CONTROLLER •
Unpack Color Controller with 6 ft. cord.
• Locate the Color Controller jack at the base of the Bubble Tube . It is the larger of the two “telephone” looking jacks. • Connect the Color Controller to the Bubble Tube Base. • Press all 4 buttons at the same time turns on and off the pump (affecting the bubble flow). • Each button can be pressed individually or two or more at a time to produce up to 8 different color combinations.
Rev 1-25
TFH USA Ltd.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
Made with FlippingBook - professional solution for displaying marketing and sales documents online