Step 5: FIBER OPTICS • The Fiber Optic Light Source is installed under the bottom shelf of the Tidy Box. The Fiber Optic Strands are attached to the Light Source. • Carefully remove the zip ties from the Fiber Optic Strands • The Fiber Optic Strands will come on when you plug in the Vecta. They will cycle through different colors slowly and a “sparkle” feature. • If you do not want the Fiber Optics Strands on, you can unplug them from the power strip at the back of the Vecta cart. • Should you find a frayed strand, Turn the Vecta off (unplug it). Follow the strand to the light source and cut with scissors. Check regularly for frayed fiber optic strands. Step 6: OPTI SOLAR 80 Projector • To mount the Solar 80 Projector to the top of the Vecta locate the black knob at the top of the Vecta stand next to the Bubble Tube stopper. • Unscrew the knob and place the predrilled bracket at the base of the Solar 80 Projector over the bolt. • Screw the black knob on to the bolt (hand tighten). • By loosening the black knob, you will be able to rotate the Solar 80 Projector to project the moving images anywhere in the room. The black handle on the side of the Solar 80 allows you to point the projector to the ceiling or the floor. • Plug in Solar 80 Projector to the power strip located on the back of the Vecta stand. • Use QR code for Solar 80 Projector operation.
Step 7: BLUETOOTH AMPLIFIER • Amplifier is mounted to a shelf inside the storage cabinet. The speakers are on the front on either side of the Bubble Tube. • Connect your smartphone or tablet to our Bluetooth Amplifier and select your music allowing your preference of music. • USB port is for USB memory sticks with preloaded music. Create your own playlists using this method. Step 8: ACRYLIC MIRRORS • Carefully remove the protective cover from the mirrors behind the Bubble Tube and on each winged door. See “Maintenance of the Vecta” for cleaning information. • There are two mirrored wings which allow the illusion of more than one bubble Tube. The wings can be moved 180 degrees. • Close the wing flush to the Vecta cart and lock in place prior to moving.
Step 9: VECTA CART WHEELS •
Two wheels on the base lock by stepping down on the metal levers. • Lift up on the metal levers to unlock.
Rev 1-25
TFH USA Ltd.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
Made with FlippingBook - professional solution for displaying marketing and sales documents online