VECTA DELIGHT MOBILE SENSORY STATION
INSTRUCTION MANUAL
TFH USA Ltd. 4537 Gibsonia Road Gibsonia, PA 15044 800-467-6222 www.specialneedstoys.com
Thank you for your purchase of a TFH VECTA Delight Distraction Station.
This booklet contains product maintenance instructions and assembly instructions of the equipment on the VECTA Cart. We recommend that you keep this information in the VECTA cabinet as a reference for anyone using the VECTA.
All questions regarding repair and maintenance should be directed our Technical Support Department at 800-467-6222 .
Your VECTA is covered by a one-year warranty from TFH from purchase date. We will repair or replace items due to defect or workmanship. DO NOT return any items without a return authorization number. Our warranty does not cover damage due to improper use or lack of maintenance or on-site service.
We appreciate your business and hope you enjoy your new VECTA Delight.
Rev 1-25
TFH USA Ltd.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
SET UP INSTRUCTIONS
Read Instructions First
The Vecta is a mobile cart that allows you to take the Multi-Sensory experience from room to room. The Vecta cart comes fully assembled with most of the equipment already installed. The Vecta has a UL power distribution and hospital-grade protection bar that allows you to plug all of the equipment into one fused power supply. SHIPPING LIST Vecta Delight includes: 48” Interactive Hurricane Tube (waterless) Bluetooth Amplifier Vecta Cart 100 Tail, 2M Fiber Optic Spray with Light Source Acrylic Mirrors 12’ Electrical Cord Hospital Grade Power Strip Key to Storage Cabinet STORAGE CABINET (rear of Vecta)
OPTI Solar 80 Projector 4-Button Color Controller Effects Wheels Hurricane Tube Cleaner (9BCC)
Step 1: •
Remove Vecta Unit from original box.
• Locate the Storage Cabinet in the rear of the Vecta. • Remove all items from the Tidy Box. Key is located on hook on back of cabinet. • Verify that you received everything on the Shipping List.
Step 2: • Plug in the Vecta to make sure it is operational. Watch for lights to come on in the Hurricane Tube base and listen for the pump motor to come on. Watch for the lights to come on in the fiber optic tails. Step 3: HURRICANE TUBE • Speed adjustment is the black knob on the front of the Hurricane Tube base. Allows you to regulate the flow of the specially coated white beads to customize the sensory/distraction session. • Switch jack is in the front of the Hurricane Tube base will accommodate any ¼” jack switch. For 1/8” jack switches, you can purchase a jack adaptor from your local electronics store. • 4- Button Color Controller can be plugged into the “telephone - type” jack at the base of the tube. You can add different wireless Color Controllers or our MSE Genie App to control the Hurricane Tube with our free App (see website for details). • Step 4: COLOR CONTROLLER • Unpack Color Controller with 6 ft. cord. • Locate the Color Controller jack at the base of the Bubble Tube . It is the larger of the two “telephone” looking jacks. • Connect the Color Controller to the Bubble Tube Base. • Press all 4 buttons at the same time turns on and off the pump (affecting the bubble flow). • Each button can be pressed individually or two or more at a time to produce up to 8 different color combinations. Step 5: FIBER OPTICS • The Fiber Optic Light Source is installed on the bottom shelf of the Tidy Box. The Fiber Optic Strands are attached to the Light Source. • Carefully remove the zip ties from the Fiber Optic Strands
Rev 1-25
TFH USA Ltd.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
• The Fiber Optic Strands will come on when you plug in the Vecta. They will cycle through different colors slowly and a “sparkle” feature. • If you do not want the Fiber Optics Strands on, you can unplug them from the power strip at the back of the Vecta cart. Step 6: OPTI SOLAR 80 Projector • To mount the Solar 80 Projector to the top of the Vecta locate the black knob at the top of the Vecta stand next to the Hurricane Tube stopper. • Unscrew the knob and place the predrilled bracket at the base of the Solar 80 Projector over the bolt. • Screw the black knob on to the bolt (hand tighten). • By loosening the black knob, you will be able to move the Solar 80 Projector to project the moving images anywhere in the room. The black handle on the side of the Solar 80 allows you to point the projector to the ceiling or the floor. • Plug in Solar 80 Projector to the power strip located on the back of the Vecta stand. • Use QR code for Solar 80 Projector operation.
Step 7: BLUETOOTH AMPLIFIER • Amplifier is mounted to a shelf inside the storage cabinet. The speakers are on the front on either side of the Bubble Tube. • Connect your smartphone or tablet to our Bluetooth Amplifier and select your music according to your preference of music. • USB port is for USB memory sticks with preloaded music. Create your own playlists using this method. Step 8: ACRYLIC MIRRORS • Carefully remove the protective paper from the mirrors behind the Hurricane Tube and on each winged door. See “Maintenance of the Vecta” for cleaning information. • There are two mirrored wings which allow the illusion of more than one Hurricane Tube. The wings can be moved 180 degrees. • Close the wing flush to the Vecta cart and lock in place prior to moving.
VECTA CART WHEELS
Step 9:
• Two wheels on the base lock by stepping down on the metal levers. • Lift up on the metal levers to unlock.
Rev 1-25
TFH USA Ltd.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
MAINTENANCE OF THE VECTA
MAINTENANCE OF HURRICANE TUBE
Hurricane Tube is all LED so no bulbs to burn out or replace. No water means no water maintenance. For disinfecting the Vecta, use either the Disinfecting Cleaning Spray (9BCC) or Disinfecting Cleaning Wipes (9BCCW) on the exterior parts of the equipment only.
MAINTENANCE OF TFH FIBER OPTIC STRANDS
The TFH Fiber Optic Strands should be cleaned regularly using a solution of 50:50 water and hydrogen peroxide or the Disinfecting Cleaning Spray (9BCC) or Disinfecting Cleaning Wipes (9BCCW) wiped down the entire length of the strands. No chlorine bleach should be used to clean the strands.
Check ends of strands regularly for frayed ones and cut them as close to the light source as possible. Turn off the Vecta before cutting the strands.
MAINTENANCE OF FIBER OPTIC LIGHT SOURCE The light source uses an LED light so there is no need to replace bulbs. Use clean damp cloth to wipe the outside of light source box if necessary.
MAINTENANCE OF SOLAR 80 PROJECTOR A clean damp cloth to wipe the outside of the projector. Compressed air to remove dust from inside the projector.
MAINTENANCE OF ACRYLIC MIRRORS Use a very soft cloth and non-astringent cleaner on mirrors. We recommend vinegar and water solution.
YOU CAN USE THE DISINFECTING CLEANING SPRAY (9BCC) or WIPES (9BCCW) ON ALL EXTERIOR PARTS OF THE VECTA TO DISINFECT.
If you have any questions on the use or assembly of the Vecta, call TFH at 1-800-467-6222 and we will be happy to help.
VECTA SPECIFICATIONS Cart Height: 60” Cart + Projector: 69” Width: 20” (wings closed) Width: 44” (wings fully open) Depth: 27” Weight: 260 lbs. 120V, 15 amps, 60 Hz
Rev 1-25
TFH USA Ltd.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
Statement of Policy TFH equipment is designed and manufactured only for supervised activity. This equipment must not be used unsupervised. It is the supervisor’s responsibility to ensure that the equipment is appropriate for the individual; that it is used safely; and p ut away when not in use. Guarantee of Satisfaction As you know, we’ve always been passionate about helping those involved with the challenges and joys of caring for those with disabilities. All our products are selected with great care to make play and learning opportunities available to everyone. Our reputation for quality is second to none and all TFH products are guaranteed for one year. Full Year Limited Warranty All TFH Products are guaranteed against defects in material and workmanship for one full year from the date of shipment. Any such defect will be repaired, or the product replaced, at our option, upon return to our offices. You must contact us for a return authorization before sending us any equipment on Toll Free 800-467-6222. All equipment will wear with use and no guarantee is made against normal deterioration. We recommend you inspect all weight bearing equipment, fittings and supports to guard against injury. Any alteration of equipment or improper use of equipment will void our warranties.
Technical Support Technical Support is available for any issues you have with our equipment. Please call 800-467-6222 for more information.
Limitation of Liability Our products are intended for supervised use and even though we use the finest materials available, we cannot guarantee freedom from injury. The supervisor assumes all risk of injury or applicability during use. All merchandise is sold under this condition, which no representative of the company can waive or change. TFH Return Policy If you are not happy with your purchase you may, of course, return it. To initiate this process, please call TFH at 800-467-6222 for a Return Authorization Number (RA number). This number must be written on the outside of each box being returned along with our address. Items returned without an RA number will be refused. We accept only unused/unassembled items in resalable condition. Return freight is the customer's responsibility unless an item was sent to you in error. Truck items must be returned by the same carrier that delivered them. Return freight must be prepaid. If merchandise is returned within 30 days of receipt in resalable condition, you will receive a full refund. If return is after 30 days but less than 90 days, a restocking fee will be charged. Restocking fees are: 31-60 days - 15%; 60-90 Days - 50%. Sorry no returns will be accepted after 90 days. All returned merchandise should be packaged securely to prevent damage and shipped pre-paid preferably insured USPS or UPS to the address below. If you feel an item is defective and would like reimbursed for your return shipping charges. If possible, use the box and packaging materials that your order was shipped in.
Please send returns to: TFH USA
Rev 1-25
TFH USA Ltd.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
4537 Gibsonia Road Gibsonia, PA 15044
Rev 1-25
TFH USA Ltd.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6Made with FlippingBook - professional solution for displaying marketing and sales documents online