View ISO/IEC 17025 Certificate of Accreditation.
CERTIFICATE OF ACCREDITATION The ANSI National Accreditation Board Hereby attests that
Mountz, Inc. 1080 N. 11th St.
San Jose, CA 95112 Fulfills the requirements of ISO/IEC 17025:2017 In the field of CALIBRATION This certificate is valid only when accompanied by a current scope of accreditation document. The current scope of accreditation can be verified at www.anab.org.
______________________________ Jason Stine, Vice President
Expiry Date: 29 October 2026 Certificate Number: AC-1346
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Mountz, Inc. 1080 N. 11th St. San Jose, CA 95112 Sean Brennan 669-306-4450 CALIBRATION Valid to: October 29, 2026 Certificate Number: AC-1346
Mass and Mass Related
Reference Standard, Method and/or Equipment NIST Class F Weights, Torque Wheels, Torque Arms, Weight Hangers Reference Load Cells
Expanded Uncertainty of Measurement (+/-)
Parameter / Equipment
Range
Torque Transducers
1 ozf·in to 1 000 lbf·ft
0.13 % of reading
Torque Transducers
(100 to 20 000) lbf·ft (1 to 160) ozf·in (10 to 750) lbf·in (50 to 2 500) lbf·ft (100 to 10 000) lbf·ft (1 to 160) ozf·in (10 to 750) lbf·in (50 to 500) lbf·ft (75 to 7 500) lbf·ft
0.15 % of reading 2.75 % of reading 1.9 % of reading 0.92 % of reading 0.71 % of reading 3.5 % of reading 2.2 % of reading 1.04 % of reading 0.89 % of reading
Torque Hand Tools 1
Digital Torque Tester
Torque Power Tools 1
Digital Torque Tester
Calibration and Measurement Capability (CMC) is expressed in terms of the measurement parameter, measurement range, expanded uncertainty of measurement and reference standard, method, and/or equipment. The expanded uncertainty of measurement is expressed as the standard uncertainty of the measurement multiplied by a coverage factor of 2 ( k =2), corresponding to a confidence level of approximately 95%. Notes: 1. On-site calibration service is available for torque hand tools up to 250 lbf·ft and the torque power tools up to 1 000 lbf·in parameter. Since on-site conditions are typically more variable than those in the laboratory, larger measurement uncertainties are expected on-site than what is reported on the Scope of Accreditation. 2. This scope is formatted as part of a single document including Certificate of Accreditation No. AC-1346.
www.anab.org
Version 010 Issued: August 8, 2024
Page 1 of 1
Page 1 Page 2Made with FlippingBook Annual report maker