PLANNING TIPS AND ADVICE
FILLER PANELS Filler panels are available to fill gaps at the ends of runs of furniture and to clad ends of furniture for a perfect match. CLAD-ON DESIGN END PANELS Clad-on design end panels are available in slim and standard depth configurations and are 18mm or 30mm thick (depending on the finish, see pages 146-149 for further information). Give a different style to your bathroom design by cladding these to the sides of units for a framed look. Design panels are 820mm tall, allowing them to run from the floor to the underside of the worktop if necessary. They can be cut down if base units are wall hung. The slim design panels can also be cut down to be used with wall cabinets or wall cupboards. You can achieve very different effects by contrasting the panels and fascias of units. Matching colours between doors and accent panels creates a subtle yet ‘solid framed’ look. HANDLES The comprehensive range of handles in the our range allows a multitude of looks to be created. Move them into different positions on the door, or change their orientation, to create the look you want on your furniture. Please note that all doors will require your fitter to drill and fit your handles so that you can position them exactly where you want. Products with a brass finish may not match exactly due to variations in the brass alloy composition, differences in finishing techniques, natural aging processes causing patina and the lighting they are compared in. Imagery shown in this brochure are representative only.
BATH PANELS Designed to complement all door styles. Both front and end panels are supplied with a matching plinth which allows for adjustment depending on site conditions. To achieve a continuous look between the furniture and the bath panel, it is recommended that the panel is set at a height of 520mm, so that a plinth height of 180mm is achieved. Note: Once installed all bath panels must be sealed along the top, bottom and sides with a suitable silicone sealant to prevent damage from excessive moisture.
1800mm Bath tub 1700mm Panel
For further technical information please visit roperrhodes.co.uk
160
Made with FlippingBook Converter PDF to HTML5