This is an interactive catalogue showcasing all our printing solutions offered to you. Click the links and videos within the catalogue for more information.
Email: techsupport@jgelectronics.com
Tel: 011 789 6033
Web: www.jgelectronics.com Fax: 011 781 3065 _______________________________________________________________________________________
Instructions for: Press-Craft
OPTIONAL Add-Ons: Mug attachment and Cap attachment:
1. Always keep your press in the grey tray when it's switched on or heating up, to protect your table from burning. Put the press back into the tray after every item you press.
2. Switch the press on by holding the power button for 5 seconds.
3. If the press is in Fahrenheit , set it to Degrees Celsius by pressing the + and - button at the same time.
4. Press the Setting button, the temperature will flash. Set the temperature by pressing the + and - button.
5. Press the Setting Button again, the seconds will now flash. Set the seconds by pressing the + and - button.
6. Press the Setting Button for the 3 rd time, then your press will start heating up until it reaches the temperature.
7. While it is heating up, you can set the motor settings. This will make the press Vibrate in the selected vibration frequency that you set the press on. The press will then vibrate when the seconds count down when you press. This you will need when you press flat items. The next step will show you how to put the motor on.
8. Press the setting button again until the seconds are reflected on the screen.
9. Then press the power button:
10. Press the minus button to choose the motor speed you want. 1-1 will be fine for most items.
11. Then press the power button again to show how it heats up. When you start pressing, press the power button to start the clock.
12. Place the press pad next to your press. Cover the press with silicone/copy paper/ Teflon sheet when you press smaller items to prevent the ink from transferring to your press pad. Press all flat items on this Press pad and not without the press pad.
13. If you did buy the mug or cap attachment, make sure you switch off your press before you plug the extra element into the press. Remove the black cover from the attachment plug.
14. Plug the cable of the attachment into the flat press
15. For the mug attachment, open the element by lifting the clip upwards.
16. Insert a mug without a print into the press first to heat up the element, the bottom of the mug will face this way.
17. Close the element and secure the clip to keep it closed.
18. Switch the press on and set the time and temperature (you will set the time and temperature on the flat press controller as from step 1 in this manual). Please note that the flat press will not heat up when the attachment is plugged in. No motor/vibrations will be used for the mug and cap attachments.
19. When the temperature is reached, replace the mug without a print, with a mug with a sublimation print on, and press the power button to start the clock.
20. When you want to insert the Cap attachment, make sure the press is switched off. Then plug the attachment in.
21. Switch the press on and set the time and temperature the same way as from Step 1.
22. Place the cap with print over the base of the Cap attachment and then press the cap by holding the top element on top of the print, until the time is up. Add pressure to this element with your hands.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7Made with FlippingBook - professional solution for displaying marketing and sales documents online